In January, OtterBox introduced its newest tackle iPhone safety. Now the brand new OtterGrip Symmetry Case is on the market with 3x military-grade drop safety and a helpful built-in grip that works with MagSafe. I’ve been testing it out for the previous few weeks, right here’s a hands-on have a look at OtterGrip for iPhone.
OtterGrip Symmetry iPhone Case evaluation
Options and specs
- MagSafe suitable
- Built-in grip – sits flush in case when not in use
- 360-degree rotation
- Mushy-touch end
- Versatile to permit for multi-finger use
- Snug for prolonged use
- 3x MIL-STD drop safety
- Created from ~50% recycled supplies
- Out there for iPhone 14 lineup and iPhone 13
- Lasting antimicrobial expertise helps shield case towards many widespread micro organism
- Restricted lifetime guarantee
- Is available in: black, inexperienced, pink, blue storm, peaches, and poppies by the ocean
- Value: $59.95
Construct and supplies
The OtterGrip has a polycarbonate and rubber construct. The again includes a matte end on the exhausting polycarbonate with the softer rubber used for the sting of the case.
The case options beneficiant cutouts for the audio system, Lightning port, and aspect swap and has plastic buttons for the amount and the aspect buttons that provide a exact, clicky really feel. It additionally options raised edges to guard the iPhone’s display and cameras.
The built-in grip spins 360 levels and simply pops in and misplaced. Nevertheless it has sufficient rigidity that when it’s sitting flush within the case, it received’t come out by itself.
OtterBox says the grip’s stem is “made out of an progressive mixture of supplies” that provides a tender contact whereas being sturdy and sturdy.
Circling the built-in grip is the magnet for MagSafe compatibility.
In use
With the built-in grip and 3x MIL-STD drop safety, you may think the OtterGrip is a chunkier iPhone case. However impressively, it’s barely thicker than Apple’s Leather-based iPhone case.
I’ve discovered the built-in grip to be very snug, largely utilizing it with one finger in and my ring and pointer fingers on the skin of it. These with smaller palms/fingers can undoubtedly use it with two fingers within the grip, however I really feel like utilizing one presents extra flexibility to maneuver your iPhone whereas tapping, typing, and so forth.
The stems of the grip are very gentle and versatile however really feel sturdy and sturdy. The fabric appears much like the fluoroelastomer used for Apple Watch Sport Bands however a contact extra inflexible.
The MagSafe-compatible magnet within the OtterGrip is simply as sturdy or perhaps a contact stronger than the official Apple Leather-based Case. I’ve used it with a wide range of MagSafe equipment together with an official MagSafe 15W wi-fi charger.
Constructive criticism
The one constructive criticism I can consider for OtterGrip is it might have been nice if OtterBox might have found out a manner for the built-in grip to additionally perform as a stand on your iPhone.
For those who attempt to make that occur, the grip pops again into the case underneath the load of the iPhone.
Wrap-up
General, I feel OtterGrip is a intelligent and helpful iPhone case. It in fact received’t be for everybody, however for these in search of an iPhone grip with out dropping entry to MagSafe, it’s essentially the most elegant resolution I’ve seen with a comparatively slender design.
Execs:
- Snug and handy built-in grip
- Sturdy MagSafe magnet
- 3x MIL-STD drop safety with out being cumbersome (plus good safety for display and cameras with raised edges)
Cons:
- Grip doesn’t work as a stand
For excelling at what OtterBox got down to do with this case, I give OtterGrip a 5/5 score.
You’ll be able to decide up OtterGrip for iPhone 14/14 Plus, iPhone 14 Professional/Professional Max, and iPhone 13 in your selection of six colours now for $59.95 at OtterBox.
FTC: We use earnings incomes auto affiliate hyperlinks. Extra.
